sherlogo[1]

 

Lathe Information and Prices

4000pichttp://www.sherline.com/images/4400pic.jpg

Prices

Prices subject to change without notice, Updated 13/2/17

 

Click on pictures below for enlarged view

STANDARD EQUIPMENT: Sherline lathes include the following as standard equipment: 90 VDC motor w/ electronic speed control, faceplate, drive dog, tool post, pre-sharpened 1/4" high speed steel (HSS) cutting tool, #0 and #1 Morse dead centres, 4 hex adjustment keys, 2 spindle bars, laser engraved aluminium handwheels and 48-page colour instruction manual. Sherline machines operate on any incoming current from 100 to 240 VAC, 50-60 Hz without an external transformer. All machines and accessories come with a 1-year limited warranty.

DIGITAL READOUTS: Any Sherline lathe or mill can be ordered with factory installed Digital Readouts (DRO). Lathes include 2 encoder handwheels on the crosslide and leadscrew, mills include 3 encoder handwheels for X-, Y- and Z-axes. Electronics box includes 3-axis LED readout plus an encoder for continuous readout of spindle RPM. DRO handwheels replace the standard handwheels, so in the case of the 4400-series lathes and the 5400 and 2000-series mills, the DRO handwheels replace the adjustable “zero” handwheels. Electronics can be initialized to work with either inch or metric machines. 110VAC power supply is included. Machines equipped with DRO are denoted by the machine or machine/accessory package part number followed by the letters “DRO.”

CNC-READY MACHINES: Any Sherline lathe or mill can be ordered with stepper motor mounts in place of the handwheels ready for the installation of NEMA 23 size stepper motors. (Stepper motors, drivers and software are not included.) Handwheels are included for use on the rear shaft of dual shaft stepper motors, but the stepper motors must be installed before manual control can be achieved. Machines equipped with stepper motor mounts are denoted by the machine or machine/accessory packages part number followed by the letters “CNC”. See the CNC Price List for additional CNC components like a driver box and stepper motors. Complete CNC systems including a computer are also available.

PART NO.

PRODUCT DESCRIPTION

WT/KG

PRICE $

4100

 

4000picsSherline 3.5" x 8" lathe with high torque DC motor and speed control

10.89

 

$1,232.00

4100-DRO

Model 4100 lathe with P/N 8260 2-axis digital readout/RPM display factory installed

12.25

1,875.00

4100-CNC

 

Model 4100 lathe equipped with stepper/servo motor mounts ready to convert to computer numeric control (CNC) (Stepper/servo motors, software, drivers and computer NOT included)

12.25

1,570.00

4410

4400picsSherline 3.5" x 17" long bed lathe w/ adjustable zero handwheels and rocker tool post

13.61

1,395.00

4410-DRO

Model 4410 lathe with P/N 8260 2-axis digital readout/RPM display factory installed

14.97

1,881.00

4410-CNC

Model 4410 lathe equipped with stepper/servo motor mounts ready to convert to computer numeric control (CNC) (Stepper/servo motors, software, drivers and computer NOT included)

14.97

1,740.00

4530

http://www.sherline.com/images/4500pic.jpg3.5" x 8" Model 4100 lathe w/ adjustable zero handwheels instead of plain handwheels

10.85

1,280.00

LATHE PACKAGES

Sherline lathes can be purchased with three different selections of our most popular accessories. Purchasing a machine/accessory package offers additional price savings compared to purchasing the machine and accessories separately. The A, B and C packages are described below. Machines in these packages can also be ordered with stepper motor mounts ready for the application of CNC controls.

A PACKAGE: Lathe PLUS 3-jaw chuck and tailstock drill chuck. 4000/4100 and 4500/4530 lathes come with a 2.5” 3-jaw chuck and a 1/4” tailstock chuck. 4400/4410 lathes come with a 3.1” 3-jaw chuck and a 3/8” tailstock chuck.

B PACKAGE: Lathe PLUS chucks listed in the A package above AND the following accessories: 1074 Steady rest, 1191 Live centre, 3002 Cutoff tool and holder, 3007 3-piece 1/4” HSS cutting tool set (LH, RH and Boring tools), 3020 5/32” Hex T-driver, 3021 3-piece centre drill set and 5327 Sherline Accessories Shop Guide book.

C PACKAGE: Everything in above A and B packages PLUS a 1270 (1280) Compound slide and 3100 Thread cutting attachment.

PART NO.

PRODUCT DESCRIPTION

WT/KG

PRICE

4100A lathe package

http://www.sherline.com/images/4000Apicm.jpgModel 4100 3.5" x 8" lathe PLUS 1041 2.5" 3-jaw chuck and 1072 1/4" drill chuck

11.34

1,358.00

4100A-DRO

6000c4100A lathe package with digital readouts factory installed

12.70

1,890.00

4100A-CNC

CNC-ready

http://www.sherline.com/images/4000aCNCpicS.jpg4100A lathe package equipped with stepper/servo motor mounts ready to convert to computer numeric control (CNC) (Stepper/servo motors, software, drivers and computer NOT included)

12.70

1,710.00

4100B lathe package

http://www.sherline.com/images/4000b.jpg4100A lathe package (see above) PLUS 1074 steady rest, 1191 live center, 3002 cutoff tool and holder, 3007 1/4" HSS tool set, 3020 Sherline T-driver, 3021 center drill set and 5327 Sherline Shop Guide book.

14.06

1,677.00

4100B-DRO

http://www.sherline.com/images/4000bDROpicS.jpg4100B lathe package with digital readouts factory installed

15.42

2,210.00

4100B-CNC

CNC-Ready

http://www.sherline.com/images/4000bCNCpicS.jpg4100B lathe package equipped with stepper/servo motor mounts ready to convert to computer numeric control (CNC) (Stepper/servo motors, software, drivers and computer NOT included)

15.42

2,015.00

4100C lathe package

4000Cpics4100B lathe package above PLUS 1280 compound slide and 3100 thread cutting attachment

15.42

2,077.00

4100C-DRO

http://www.sherline.com/images/4000cDROpicS.jpg4100C lathe package with digital readouts factory installed

16.78

2,610.00

4100C-CNC

CNC-Ready

http://www.sherline.com/images/4000cCNCpicS.jpg4100C lathe package equipped with stepper/servo motor mounts ready to convert to computer numeric control (CNC) (Stepper/servo motors, software, drivers and computer NOT included)

16.78

2,414.00

4530A

Same as 4100A package above except adjustable "zero" hand wheels replace standard hand wheels.

11.34

1,436.00

4530B

 

Includes all items shown in 4100B package

above except  adjustable "zero" hand wheels

replace standard hand wheels.

14.06

1,756.00

4530C

Includes all items shown in 4100C package plus

adjustable "zero" hand wheels replace std. ones

15.42

2,165.00

 

 

 

 

4410A lathe package

4400ApicsSherline Model 4410 3.5" x 17" lathe w/ 1040 3/1" 3-jaw chuck and 1069 3/8" drill chuck

14.97

1,615

4410A-DRO

http://www.sherline.com/images/4400aDROpicS.jpg4410A lathe package with digital readouts factory installed

16.33

2,100.00

4410A-CNC

CNC-Ready

http://www.sherline.com/images/4400aCNCpicS.jpg4410A lathe package equipped with stepper/servo motor mounts ready to convert to computer numeric control (CNC) (Stepper/servo motors, software, drivers and computer NOT included)

16.33

1,920.00

4410B lathe package

4400BpicsSherline model 4410A lathe package above PLUS 1074 steady rest, 1191 live center, 3002 cutoff tool, 3007 1/4" HSS tool set, 3020 Sherline T-driver, 3021 center drill set and 5327 Sherline Shop Guide book

16.33

1,920.00

4410B-DRO

http://www.sherline.com/images/4400bDROpic.jpg4410B lathe package with digital readouts factory installed

17.69

2,415.00

4410B-CNC

CNC-Ready

http://www.sherline.com/images/4400bCNCpicS.jpg4410B lathe package equipped with stepper/servo motor mounts ready to convert to computer numeric control (CNC) (Stepper/servo motors, software, drivers and computer NOT included)

17.69

2,225.00

4410C lathe package

4400CpicsSherline model 4410B lathe package above PLUS 1280 compound slide and 3100 thread-cutting attachment

18.60

2,334.00

4410C-DRO

http://www.sherline.com/images/4400cDROpicS.jpg4410C lathe package with digital readouts factory installed

19.96

2,820.00

4410C-CNC

CNC-Ready

http://www.sherline.com/images/4400cCNCpicS.jpg4410C lathe equipped with stepper/servo motor mounts ready to convert to computer numeric control (CNC) (Stepper/servo motors, software, drivers and computer NOT included)

19.96

2,640.00

8765

http://sherline.com/Wordpress/wp-content/uploads/2015/11/8765_pic.jpg Includes 8760 driver

box plus two P/N 67127 Stepper Motors

4.08

1,324.50

 

Specifications

FEATURE

4100

4410

Swing over bed

90 mm

90 mm

Swing over cross slide

48 mm

48 mm

Distance between centres

200 mm

430 mm

Hole through spindle

10 mm

10 mm

Spindle nose thread

3/4"-16 T.P.I.

3/4"-16 T.P.I .

Spindle nose taper

#1 Morse

#1 Morse

Travel of cross slide

110 mm

110 mm

Tailstock spindle travel

32 mm

32 mm

Taper of tailstock spindle

#0 Morse

#0 Morse.

Headstock protractor graduations

0° to 45° by 5°

0° to 45° by 5°

Hand wheel graduations

0.01mm

0.01 mm

Motor

1/3 HP DC, 90 Volts (See motor specifications)

Speed control

Electronic: accepts any incoming voltage from 100VAC to 240 VAC, 50 or 60 Hz and automatically converts it to 90 VDC for motor

Spindle speed range

70 to 2800 RPM, continuously variable by electronic speed control (Optional pulley set allows speeds to 10,000 RPM)

Length overall

610 mm

820 mm

Width overall

190 mm

220 mm

Height overall

150 mm

200 mm

Shipping weight

10.9 kg

13.6 kg