sherlogo[1]

ACCESSORY INFORMATION &PRICES

http://www.sher.com.au/accessprice/imagexx.jpg

                                                                                                         Prices updated April 2016

 

 

Accessories used with the lathe are shown with the part number in red
Accessories used with the mill are shown with the part number in blue
Accessories that can be used with either the lathe or mill are shown with the part number in black

 

PART NO.

PRODUCT NAME AND USE

WT/KG

PRICE A$

1012

SENSITIVE DRILLING ATTACHMENT (Threads onto mill spindle. Spring loaded 5/32" chuck is pulled down by hand using a bearing supported knurled collar. Provides quick action and great "feel" when drilling small holes.)

0.9

$202.96

1074

STEADY REST (Supports the end of long work for centre drilling)

0.34

$83.82

1090

FOLLOWER REST (Supports thin work, keeps it from deflecting away from the cutter, moves with the lathe saddle to "follow" the work)

0.34

$130.01

1150

WW LEVER COLLET CLOSER

1.00

$461.58

1160

WW COLLET SET (Metric P/N 1178) (P/N 1161 included in set) (Collets are like small, individually sized chucks for holding a specific diameter tool or material. WW collets have a hole through the collet and drawbar to accept long material. Traditionally used by watch and clock makers. Sherline WW collets have a .312-.313 body size and .275-40 thread.)

0.23

$158.54

116000 + size

WW COLLET, CUSTOM SIZE (Custom size collets can be ordered in sizes from .050" to .320" or 1.28 mm to 8.13 mm. For example, a custom collet might be ordered as 116000 0.100" or 116000 2.75 mm.) Custom collets are not laser engraved with size information. Allow 3 weeks for delivery.

0.023

$77.46

116000

WW COLLET BLANK, Large Head

0.023

$32.80

1160001

WW COLLET BLANK, Small Head

0.023

$32.80

116001

1/64" WW COLLET

0.023

$77.46

116002

1/32" WW COLLET

0.023

$65.13

116003

3/64" WW COLLET

0.023

$48.20

116004 through 116020

WW COLLETS from size 1/16" to 5/16" by 64ths. The part number is given as 1160__ plus the number of 64ths to denote size. For example, 13/64" is P/N 116013 and a 1/4" collet (16/64") is P/N 116016.

0.023

$42.03

1161

WW COLLET ADAPTER & DRAWBAR (Included in collet set. Adapts WW taper to #1 Morse taper of Headstock)

0.23

$96.94

1162

DELUXE WW COLLET SET (Inch) (17 collets, adapter, drawbar, pot chucks, knockout bar, etc. in wooden case)

1.36

$466.14

1163

8.0 MM COLLET ADAPTER & DRAWBAR (WW collets vary somewhat depending on manufacturer. This adapter holds those with a .314-.315 body size)

0.223

$104.64

1164

WW COLLET FIXTURE (Allows WW collets with .312-.313 body to be held on face of rotary table or mill table.)

0.45

$186.19

1165

8.0 MM COLLET FIXTURE (Allows WW collets with .314-.315 body to be held on face of rotary table or mill table.)

0.45

$201.57

1170

OAK WW COLLET STORAGE BOX (A high quality storage box that holds up to 22 WW collets plus collet pot chucks, drawbar, knockout bar and WW collet adapter. Bevelled corners & brass hardware.

0.45

$62.98

1171

OAK WW COLLET STORAGE BOX (A high quality storage box that holds up to 96 WW collets. Bevelled corners, brass hardware, oak insert with 96 holes, satin lacquer finish.)

0.45

$73.76

117803

.3 mm WW COLLET

0.02

$77.46

117804

.4 mm WW COLLET

0.02

$77.46

117805 through 117808

WW COLLETS from size .5mm through .8 mm by .1 mm increments. The Part number is given as 11780 plus the collet size in .1 mm. For example, a .6 mm collet would be P/N 117806

0.02

$77.46

117809 through 117814

WW COLLETS from size .9mm through 1.4 mm by .1 mm increments. The part number is given as 11780_ or 1178__ plus the collet size in .1 mm. For example, a 1.1 mm collet would be P/N 117811.

0.02

$65.13

117815 through 117880

WW COLLETS from size 1.5 mm through 8.0 mm by .1 mm increments. The part number is given as 1178__ plus the collet size in .1 mm. For example, a 6.4 mm collet would be P/N 117864.

0.02

$42.03

1179

DELUXE WW COLLET SET (Metric) (14 collets, pot chucks, etc. in wooden case. P/N 1161 included in set)

1.36

$419.95

1180

COMPLETE METRIC WW COLLET SET with 78 collets sized from .3 mm to 8.0 mm by .1 mm increments plus a blank collet. The set is contained in a P/N 1171 oak collet box with 96-hole oak insert.

1.81

$1,491.62

1182

BULL NOSE LIVE CENTRE (Supports tubing or stock with a large end hole when turning between centres. Dual preloaded bearings.)

0.34

$145.41

1185

VERTICAL MILLING TABLE (Metric P/N 1184) (Mounts to lathe or mill table to move work up and down. Has 2.25" of vertical travel and 8" long table.) (Metric P/N 1184)

1.13

$222.91

1187

CHUCK-TO-T-SLOT ADAPTER (Allows 3- or 4-jaw chuck to be quickly screwed to mill table.)

0.03

$19.79

1191

LIVE CENTRE (Ball bearings allow centre to rotate with part to reduce friction when turning between centres)

0.11

$79.27

1299

EXTENDED MILL HEADSTOCK spacer

1.00

$109.73

1201

ADJUSTABLE LIVE CENTRE (Ball bearing live centre adjusts for perfect cantering of headstock and tailstock)

0.23

$120.05

1202

ADJUST. TAILSTOCK CHUCK ARBOR (Allows perfect cantering of tailstock chuck in relation to headstock)

0.23

$89.24

1203

ADJUST. TAILSTOCK TOOL HOLDER (Allows perfect cantering of round tools held in tailstock)

0.23

$89.24

1206

ADJUST. TAILSTOCK 1” DIE HOLDER w/ 13/16” bushing (Allows perfect cantering of 1” or 13/16” threading dies)

0.23

$112.35

1220

TAILSTOCK SPINDLE EXTENDER (Designed for lathes built before July, 1996 to extend reach of tailstock spindle over table. Not needed on newer lathes)

0.23

$81.54

1230

#0 MORSE ARBOR TO ¾-16 CHUCK THREAD ADAPTER (Allows a 3- or 4-jaw chuck to be mounted on the tailstock spindle)

0.23

$81.54

$0.00

$0.00

1270

COMPOUND SLIDE (Redesigned, Replaces P/N 1080) (metric P/N 1280) (An alternate and more traditional way of turning tapers)

0.45

$216.98

1272

COMPOUND SLIDE RISER BLOCK (Raises compound slide about 1” for use on front side of crosslide with riser blocks in place on lathe)

0.23

$73.84

1280

COMPOUND SLIDE (Metric) An alternate and more traditional way of turning tapers

0.45

$216.98

1288

RISER ROCKER TOOL POST (Taller tool post for use with riser blocks in place on the lathe)

0.23

$81.54

1289

RISER 3/8” INSERT TOOL POST (Taller tool post for holding 3/8” shank tools with riser blocks in place on the lathe.)

0.23

$81.54

1290

STEADY REST RISER (Lifts steady rest to match headstock when spacer block is in place. Used mainly by those who leave spacer blocks in place at all times on their lathe.)

0.11

$94.67

1291

SPACER BLOCK KIT (Lifts headstock 1.25” to allow parts up to 6” diameter to be turned. Includes extended riser rocker tool post)

0.68

$136.82

1292

TAILSTOCK RISER BLOCK (Lifts tailstock 1.25” for turning between centres with headstock riser block in place)

0.45

$101.48

1296

CUT-OFF TOOL HOLDER RISER BLOCK (Lifts cut-off tool P/N 3002 for use with riser blocks in place. Used with tool upside down on back side of crosslide table.)

0.223

$96.94

1297

MILL HEADSTOCK SPACER BLOCK (Same as riser block for lathe, but without tool post. Adds 1.25” of throat distance when milling)

0.34

$91.52

1300

MILL COLUMN SPACER BLOCK (Raises column base 2” for greater Z-axis clearance. Includes longer bolts for mounting.)

0.68

$90.63

2045

HEX AND OCTAGON INDEX BLOCK SET (Fits in mill vice to allow simple indexing of 2, 3, 4, 6 or 8 sides or hole patterns)

0.9

$125.96

2049

SPINDLE HAND WHEEL (Used to rotate the headstock spindle much like the large hand wheel on a sewing machine is used)

0.68

$98.33

2083

WW COLLET 1” BLANK (Make your own custom tool holder or collet that is held with the WW adapter and drawbar)

0.023

$62.15

2085

WW COLLET TAILSTOCK ADAPTER (Use with P/N 1203) (Allows WW collets to be held in the tailstock)

0.11

$102.37

2086

8mm COLLET TAILSTOCK ADAPTER (Use with P/N 1203)

0.11

$110.07

2090

8.0mm COLLET TO ¾-16 THREAD (For mounting Sherline chuck on watchmaker’s or jeweller’s lathe that takes 8.0mm collets)

0.23

$81.54

2091

10mm “D” COLLET TO ¾-16 THREAD (For mounting Sherline chuck on watchmaker’s or jeweller’s lathe that takes 10mm D collets, not for use on Sherline lathe.)

0.23

$89.24

2092

8.0mm COLLET TO 3/8-24 THREAD (For mounting chuck with 3/8-24 thread on watchmaker’s or jeweller’s lathe that takes 8.0mm collets, not for use on Sherline lathe.)

0.23

$81.54

2093

10.0mm COLLET TO 3/8-24 THREAD (For mounting chuck with 3/8-24 thread on watchmaker’s or jeweller’s lathe that takes 10mm D collets, not for use on Sherline lathe.)

0.23

$89.24

2094

CLOCKMAKER’S GEAR CUTTING ARBOR, 7.0mm to Morse #1 (Arbour for use on watchmaker or jeweller’s lathes to hold round gear cutter, Not for use on Sherline lathe)

0.23

$112.35

2095

CLOCKMAKER’S GEAR CUTTING ARBOR, 7.0mm to 10mm “D” Collet (Arbour for use on watchmaker’s or jeweller’s lathes to hold round gear cutter. Not for use on Sherline lathe)

0.23

$112.35

2096

CLOCKMAKER’S GEAR CUTTING ARBOR, 7.0mm to 8.0 mm WW Collet (Arbour for use on watchmaker’s or jeweller’s lathes to hold round gear cutter, not for use on Sherline lathe)

0.23

$112.35

 

 

2100

WW ¾” COLLET POT CHUCK (Collet pot chucks are like small chucks custom turned to hold a particular part. The part is held in a depression turned in the surface of the pot chuck and does not go all the way through. Includes dowel pin to clamp on while turning to size.)

0.03

$54.45

2101

WW 1” COLLET POT CHUCK (See 2100)

0.03

$57.52

2102

WW 1-1/4” COLLET POT CHUCK (See 2100)

0.03

$62.15

2103

10mm ¾” COLLET POT CHUCK (Not for use on Sherline lathe)

0.05

$70.38

2104

10mm 1” COLLET POT CHUCK (Not for use on Sherline lathe)

0.05

$78.08

2105

10mm 1-1/4” COLLET POT CHUCK (Not for use on Sherline lathe)

0.05

$85.79

2106

LIVE CENTER-TO-8mm COLLET (A live centre for watchmaker’s or jeweller’s lathes.)

0.11

$133.17

2107

LIVE CENTER-TO-10mm COLLET (A live centre for watchmaker’s or jeweller’s lathes.)

0.11

$133.17

2110

W.R. SMITH WATCHMAKER’S T-REST (Used on Sherline lathes to support a hand-held “graver”, a traditional watchmaker’s tool. Turns Sherline lathe into a first class watch or clock maker’s lathe. Designed by famed craftsman W.R. Smith. Graver-making instructions included.)

0.45

$332.49

2118

THE HOROLOGICAL MILLING  MACHINE BUSHING AND DEPTHING ACCESSORY

0.04

$140.93

2125

MICROSCOPE AND LATHE MOUNT (Mounts to table of either 4000 or 4400 series lathe. Magnifies work area using high quality stereo microscope. Microscope is complete with stand and eyepieces for use as a separate inspection scope as well as being mounted on the lathe.)

11.34

$1,435.92

2126

MICROSCOPE MOUNT FOR LATHE (Does not include microscope. Designed for microscope offered by Sherline.)

1.36

$236.69

2127

MICROSCOPE AND MILL MOUNT (Mounts to headstock on any Sherline mill. Adjusts up/down and swings over 90° from centre front to side view. Microscope is complete with stand and eyepieces for use as a separate inspection scope as well as being mounted on the mill.)

11.34

$1,574.52

2128

MICROSCOPE MOUNT FOR MILL (Does not include microscope. Designed for microscope offered by Sherline.)

1.36

$389.14

2200

RADIUS CUTTING ATTACHMENT (For cutting ball ends, convex and concave radii on ends of parts and even complete balls)

0.45

$209.28

2250

QUICK CHANGE TOOL POST w/ 3 holders (Saves time when changing tools. Holders included for 1/4" cutter, round boring tool and cut-off tool. Cutting tools not included.)

1.36

$443.05

2251

QUICK CHANGE TOOL POST RISER (Brings quick-change tool post up to proper centreline height when using a riser block under the headstock for cutting larger diameters.)

0.79

$108.29

2256

RIGHT-HAND 35° CARBIDE INSERT TOOL HOLDER (Includes one 55° insert) (Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel)

0.11

$86.97

2257

LEFT-HAND 35° CARBIDE INSERT TOOL HOLDER (Includes one 55° insert) (Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel)

0.11

$86.97

2258

PAIR OF RIGHT- and LEFT-HAND 35° 3/8" CARBIDE INSERT TOOL HOLDERS (Includes one 55° insert per holder) (Replacement inserts, P/N 7605) (For use with P/N 7600 toolpost.)

0.23

$127.75

 

2259

80° CARBIDE INSERT 3/8" ROUND BORING TOOL, 1/2" min. hole, carbide insert included (Use w/ P/N 7600 tool post)

0.07

$109.17

2260

55° CARBIDE INSERT 3/8" ROUND BORING TOOL, 3/4" min. hole, carbide insert included (Use w/ P/N 7600 tool post)

0.07

$109.17

2261

PAIR OF ABOVE 80° (P/N 2259) AND 55° (P/N 2260) 3/8" ROUND BORING TOOLS w/ inserts

0.11

$163.98

2265

3/8" NEGATIVE RAKE CERAMIC INSERT TOOL HOLDER (Includes one 3-sided ceramic insert for six cutting surfaces.) (For cutting very hard metals like tool steel. Has a 3/8" shank for use in P/N 7600 tool post.)

0.11

$110.07

2266

CERAMIC 3-SIDED REPLACEMENT INSERT For 2265 Holder

0.02

$38.96

2267

3/8" THREADING AND GROOVING INSERT TOOL HOLDER (Inserts not included. 3/8" shank requires P/N 7600 Tool post.)

0.074

$97.61

2268

60° CARBIDE THREADING INSERT for 2267 holder (2 sides)

0.02

$51.27

2269

.031" CARBIDE GROOVING INSERT for 2267 holder (2 sides)

0.02

$51.27

2270

.062" CARBIDE GROOVING INSERT for 2267 holder (2 sides)

0.02

$51.27

2280

1/4" QUICK-CHANGE TOOL BIT HOLDER (Incl. w/ 2250)

0.45

$116.88

2282

3/8”QUICK CHANGE (square) TOOL HOLDER

0.45

$116.88

2285

3/8" QUICK-CHANGE BORING TOOL HOLDER (Incl. w/ 2250)

0.45

$116.88

2290

QUICK-CHANGE CUT-OFF TOOL HOLDER (Incl. w/ 2250)

0.45

$147.68

2295

CARBIDE INSERT HOLDER for QUICK-CHANGE TOOL POST

0.45

$163.08

3001

POWER FEED (120V.) (for 240V. see P/N 3011) (Single direction motor drives lathe lead screw .9" per minute to provide smooth final cut on long parts. Not designed for use with thread cutting attachment.)

2.23

$199.41

3002

CUT-OFF TOOL & HOLDER (for cutting off work piece from the raw stock from which it was turned. Often called a "parting tool".)

0.11

$94.67

3003

TWO-POSITION TOOL POST (Holds two 1/4" cutting tools for quicker tool changes)

0.11

$42.31

3004

KNURLING TOOL HOLDER (Makes knurled finishes. Includes one set of spiral knurls. Other sizes and patterns available)

0.11

$133.17

3005

1/4" SQ. HIGH SPEED STEEL TOOL BLANK (Sharpen yourself on a bench grinder for standard or custom-shaped tools)

0.03

$20.56

3006

CARBIDE TOOL SET (3 PC) (LH, RH, 60° THREADING) (Carbide tips are brazed to 1/4" tool shanks. For cutting hard materials)

0.17

$49.65

3007

HIGH SPEED STEEL TOOL SET (3 PC) (LH, RH, BORING) (Pre-sharpened to save you time. For cutting most materials)

0.05

$55.00

3008

TWO-POSITION TOOL POST, 5/16" - 3/8" (Holds 5/16" tool on one side, 3/8" on other side. Allows use of tools other than 1/4")

0.11

$56.17

3009

CUTTING TOOL HEIGHT GAUGE (Used to assure tool tip on resharpened tools is set to proper centreline height. Works with both regular or riser tool post)

0.11

$45.39

3012

HOLD-DOWN SET (Simple strap clamp set for clamping parts to table for milling. Includes 2 clamps, T-nuts and assorted length bolts)

0.17

$57.35

 

 

3013

STEP BLOCK HOLD-DOWN SET (This is a smaller version of the sets used on most full-size mills. Quicker to use than 3012 and holds larger parts. Stepped blocks interlock to adjust height quickly. Spare block included to be cut to custom sizes)

0.45

$86.08

3015

TOGGLE SWITCH DUST SEAL (Use to keep fine dust out of speed control on/off switch when cutting brass or wood)

0.03

$29.03

3016

CUT-OFF TOOL REAR MOUNTING BLOCK (Allows 3002 cut-off tool to be mounted on "back" side of crosslide where it is out of the way and can be left in place for easy parting off. Cut-off blade mounts upside down for use in this position)

0.05

$39.59

3017

CROSSLIDE ACCESSORY PLATE (Strengthens and protects lathe table when used for milling with vertical milling column. Not for use during lathe operations as tool post height will be incorrect.)

0.45

$86.08

3018

REAR MOUNT CUT-OFF TOOL AND HOLDER

0.11

$94.67

3020

SHERLINE "T" DRIVER (5/32" hex driver with T-handle adjusts majority of 10-32 screws on Sherline tool.

0.05

$25.74

3021

CENTRE DRILL SET (3 PC., #1, #2, #3 double-ended) (Centre drills don't wander off centre when starting holes. 60° tip makes proper hole to match dead or live centre tips for turning between centres)

0.03

$40.58

3035

SPUR DRIVER (A quick way to drive wood parts when turning between centres.)

0.11

$56.17

3038

WOOD TOOL REST (3" & 5" REST) (Supports hand-held wood cutting tools for wood turning)

0.34

$106.91

3047

EXTENDED WOOD TOOL REST SET (For use w/ 1291) (Like 3038 only with longer shafts to match height of headstock with riser block in place)

0.11

$110.07

3049

BORING HEAD (Metric) (For enlarging holes to a precise inside diameter, uses 3/8" round boring tools)

0.23

$127.75

3050

VERTICAL MILLING COLUMN (Metric P/N 3053) (Converts your lathe into a 3-axis mill in less than 30 seconds.)

3.63

$319.05

3050-CNC

VERTICAL MILLING COLUMN, CNC READY (Metric P/N 3053-CNC) Converts lathe into a 3-axis mill. Stepper motor mount is ready to accept NEMA 23 frame size stepper motor for CNC control

4.08

$459.04

3052

FLY CUTTER (For quickly milling large, flat surfaces.)

0.23

$73.84

3053

VERTICAL MILLING COLUMN Metric Converts your lathe into a 3-axis mill in less than 30 seconds

3.63

$319.05

3053-CNC

VERTICAL MILLING COLUMN, CNC READY Metric Converts lathe into a 3-axis mill. Stepper motor mount is ready to accept NEMA 23 frame size stepper motor for CNC control

4.08

$459.04

3054

BORING HEAD Inch (For enlarging holes to a precise inside diameter, uses 3/8" round boring tools)

0.23

$127.75

3055

MORSE #1 BLANK (Turn on lathe and/or mill slots to make your own custom fly cutter, slitting saw holder or special tool holder)

0.23

$44.58

3056

T-NUTS, 10/32 (Set of 10)

0.03

$28.26

3057

ROCKER TOOL POST (Rocking insert with two screws allows adjustment of tool tip height for accurate turning. Eliminates shimming. Included on Model 4400/4410 lathes)

0.11

$63.87

3058

4-JAW HOLD DOWN SET (Two angle clamps with T-nuts to clamp 4-jaw vice to any position on mill table. Included with 3551 mill vice)

0.05

$25.74

3060

MILLING COLLET SET (3 PC), (Metric P/N 3090) (1/8", 3/16", 1/4") (Milling collets have a #1 Morse taper and are pulled into the headstock with a drawbolt. They do not have a through hole like WW collets. They are used to hold specific size end mills or cutters.)

0.05

$85.79

3061

BORING TOOL—Max. Depth .600, Min. Hole 1/4") (Use w/ P/N 3054 boring head)

0.05

$39.59

3063

BORING TOOL—Max. Depth 1", Min. Hole 5/16" (Use with P/N 3054 boring head)

0.05

$39.59

3064

BORING TOOL—Max. Depth 1.5", Min. Hole 5/16" (Use w/ 3054 boring head)

0.05

$44.21

3065

SLITTING SAW HOLDER (Holds small, round saw blades for cutting thin slots)

0.11

$79.27

3070

2.5" Dia. x 1-5/16" STEEL BLANK (Chuck body) w/ 3/4-16 thread (A billet of 12L14 steel threaded for the Sherline spindle, ready to turn it into whatever tool or part you need. A blank canvas for machinists.)

0.91

$72.06

3074

Tool holder for 1/4" or 3/8" Jacobs drill chucks (3/4-16 female thread to 3/8-24 male thread adapter replaces #1 Morse arbour to allow drill chucks to be threaded on to outside thread of spindle to speed up tool changes on CNC machines. No variation in drill length when changing tools back and forth. Cannot be used with 5/32" Jacobs chucks as they do not have a threaded back.)

0.23

$73.84

3075

5/16" END MILL HOLDER

0.23

$66.14

3076

6.0mm END MILL HOLDER

0.23

$66.14

3077

8.0mm END MILL HOLDER

0.23

$66.14

3078

10.0MM END MILL HOLDER (Most common size metric tool holder)

0.23

$66.14

3079

3/8" END MILL HOLDER (Most common size inch tool holder. 3/8" end mills are available from many sources and are, therefore, the least expensive and available in the largest selection.)

0.23

$66.14

6079

1/4" END MILL HOLDER (Holds end mills in 3080 set)

0.23

$66.14

6080

3/16" END MILL HOLDER

0.23

$66.14

6081

1/8" END MILL HOLDER

0.23

$66.14

3080

END MILL SET (1/4" SHK) (1/8", 3/16", 1/4")

0.03

$62.15

3087

3/32" MILL COLLET

0.03

$46.75

3089

5/32" MILL COLLET

0.03

$46.75

3090

3-PC. METRIC MILL COLLET SET w/ 3.0, 4.0 and 6.0 mm collets (See P/N 3060 for inch version set and description.)

0.07

$86.06

3091

7/32" MILL COLLET

0.03

$46.75

3092

3.0MM MILL COLLET

0.03

$40.58

3093

4.0MM MILL COLLET

0.03

$40.58

3094

6.0MM MILL COLLET

0.03

$40.58

3095

1/8" MILL COLLET

0.03

$40.58

3096

3/16" MILL COLLET

0.03

$40.58

3097

1/4" MILL COLLET

0.03

$40.58

3098

MILL COLLET (Special Order .125 to .312) (Allow 3 weeks delivery)

0.03

$77.54

3100

THREAD-CUTTING ATTACHMENT (Being able to cut threads on your lathe frees you from the expense of purchasing a lot of expensive taps and dies for non-standard size threads. Cut just about any thread, inch or metric, using this set of change gears. Hand crank wheel included)

1.36

$235.14

3200

INDEXING ATTACHMENT (Indexes in 5° increments, uses rack gear to turn rotation into measurable linear movement for divisions other than 5° multiples. Includes base and tailstock.)

3.63

$396.05

3217

GEAR TOOTH CUTTER HOLDER & HSS BLANK (Grind gear shape into tool blank and use on mill in conjunction with indexing attachment or rotary table to cut your own gears.)

0.23

$73.84

3230

MILL ARBOR-7/8" DIA. (Short) (Holds round mill cutters)

0.23

$96.94

3231

MILL ARBOR-7/8" DIA. (Long) (Holds round mill cutters)

0.23

$96.94

3235

MILL ARBOR-1" DIA. (Short) (Holds round mill cutters)

0.23

$96.94

3236

MILL ARBOR-1" DIA. (Long) (Holds round mill cutters)

0.23

$96.94

3306

STD. HEADSTOCK, DC MOTOR AND SPEED CONTROL (Complete, self-contained drive unit with pulleys designed to turn the spindle at speeds up to 2800 RPM. Alternate pulley position provides more torque and a maximum spindle speed of 1400 RPM. Operates on any current 100VAC to 240VAC, 50 or 60 Hz.)

4.54

$568.22

3307

10,000 RPM HEADSTOCK, DC MOTOR AND SPEED CONTROL (Complete, self-contained drive unit with pulleys designed to turn the spindle at speeds up to 10,000 RPM. Alternate pulley position provides more torque and a maximum spindle speed of 2200 RPM. Operates on any current 100VAC to 240VAC, 50 or 60 Hz.)

4.54

$691.41

3400

OVERSIZE HAND WHEEL (2.5" diameter for easier cranking) (Metric P/N 3410)

0.05

$39.59

3420

2" ADJUSTABLE ZERO HAND WHEEL (Mill Y-axis or lathe crosslide) (Metric P/N 3430)

0.11

$71.57

3440

2.5" ADJUSTABLE ZERO HAND WHEEL (Mill Y-axis or lathe lead screw) (Metric P/N 3450)

0.11

$79.27

3460

2.5" ADJUSTABLE ZERO HAND WHEEL (W/Thrust & Bearing Set for Mill Z-axis) (Metric P/N 3465)

0.11

$86.97

3480

VERTICAL MILLING COLUMN W/ADJ. HAND WHEEL (Metric P/N 3485) (Turns lathe into a mill in less than 30 seconds. Normally used with 4500 or 4400 lathes to match adj. Zero hand wheels)

3.63

$349.84

3500

ROTARY COLUMN ATTACHMENT (Allows mill column to be swung up to 90° to either side for angled drilling)

0.79

$154.49

3551

MILLING VICE (Holds work for milling. Looks similar to a drill press vice, but jaw pulls down and in to keep parts from lifting during milling. Precise jaws and body can be squared up with table.)

1.13

$153.60

3559

90° ANGLE PLATE (Mounts parts 90° to table for milling)

1.81

$205.72

3560

MILL TOOLING PLATE 4” X 10” (Protects mill table, pre-drilled hole pattern makes it easy to clamp parts, mount mill vice or rotary table to mill.)

1.13

$130.50

3561

Short 90° Angle Plate

0.45

$116.88

3562

MILL TOOLING PLATE 7” X 13” (Protects mill table, pre-drilled hole pattern makes it easy to clamp parts, mount mill vice or rotary table to mill.)

4

$360.02

3570

ROTATING MILL VICE BASE (Holds mill vice while allowing it to be rotated 360° using laser engraved scale for angle reference)

0.45

$178.49

3575

ROTATING MILL VICE BASE AND MILL VICE (P/N 3551) (Save by buying vice and base at same time)

1.13

$292.20

3580

MULTI-DIRECTION DELUXE VERTICAL MILLING COLUMN (Turns your lathe into an 8-direction mill in 30 seconds) (Metric P/N 3585)

5.9

$710.95

3700

4" PRECISION ROTARY TABLE (72:1 worm gear divides a circle into 3600 parts without interpolation. Used for indexing radial hole patterns or milling radii or indexed flats. Used on 3701 or 3750 to index for cutting gear teeth. 

3.63

$511.54

3700-CNC

4" PRECISION ROTARY TABLE, CNC-READY (Includes stepper motor mount ready for application of your own stepper motor and CNC controls. Hand wheel also included)

4.5

$615.79

3701

RIGHT ANGLE ATTACHMENT (For use with P/N 3700) (Mounts rotary table perpendicular to mill table)

1.36

$158.14

3702

RIGHT ANGLE ADJUSTABLE TAILSTOCK (For use with P/N 3700) (Aligns with centre of rotary table when mounted on 3701. Supports arbour shaft used to hold gear blanks when cutting teeth)

0.91

$149.07

37091

12mm to 3/8-16 ADAPTER (Allows Unimat Chuck with 12mm thread to be mounted to Sherline rotary table P/N 3700)

0.11

$40.76

37092

14mm to 3/8-16 ADAPTER (Allows Unimat Chuck with 14mm thread to be mounted to Sherline rotary table P/N 3700)

0.11

$40.76

37093

1/2-20 ROTARY CHUCK ADAPTER  (Allows Sears Chuck with 1/2-20 thread to be mounted to Sherline rotary table P/N 3700)

0.11

$40.76

37094

3/8-24 ROTARY CHUCK ADAPTER  (Allows Jacobs Drill Chuck with 3/8-24 thread to be mounted to Sherline rotary table P/N 3700)

0.11

$40.76

3750

TILTING ANGLE TABLE (Mount part, mill vice, chucks or rotary table to mill any angle from 0° to 90°. In 90° position, holds rotary table at same height as 3701, eliminating the need for that part)

1.13

$207.51

40040

Replacement Drive Belt

0.07

$29.26

4017U

MILL SADDLE LOCKING LEVER UPGRADE (Allows Z-axis lead screw to be locked with a lever on the lead screw instead of tightening a screw with a hex wrench. Standard on all mills after 1998) (Metric P/N 4117U)

0.23

$58.44

4017Z

CNC MILL ANTI BACKLASH ADJUSTER UPGRADE (Allows the Z-axis locking lever to be positioned in partially locked positions to reduce backlash to as little as .001". Standard on CNC mills after 2/04. Can be installed as an option on any Sherline mill.)(Metric P/N 4117Z)

0.23

$73.84

4150

15" LATHE VINYL COVER (Protect your 4000-series lathe from dust and grit)

0.11

$33.06

4151

24" LATHE VINYL DUST COVER (Protect your 4400-series lathe from dust and grit)

0.11

$36.15

4335

10,000 RPM PULLEY CONVERSION (High speed position allows motor to turn spindle at a maximum of 10,000 RPM. Second belt position provides more torque and a maximum of 2200 RPM. New 2-piece standoff replaces standard motor standoffs. Installs in about 10 minutes.

0.45

$147.68

4360

CHIP GUARD (Clear shield contains flying chips. Pivots out of the way when not needed. Not a substitute for safety glasses)

0.23

$43.04

4417Z

CNC LATHE BACKLASH ADJUSTER (Installs on lead screw to provide a way to reduce backlash during CNC operations. Similar to the 4017Z lock developed for the mill, it uses a lever which is tightened against the saddle nut to control backlash. A positioning arm holds the locking lever in any desired position. Installed on all CNC-ready lathes as of 5/04. Can be installed as an option on any Sherline lathe.) (Metric P/N 4417ZM.)   

0.23

 

 

 

$73.84

 

 

 

45260

15" Extended Mill Column Bed (Manual)

0.91

$218.36

45261

15" Extended Mill Column Bed (CNC)

0.91

$223.91

45270

15" Extended Column Leadscrew (Manual, Inch)

0.23

$63.06

45280

15" Extended Column Leadscrew (Manual, Metric)

0.23

$63.06

45290

15" Extended Column Leadscrew (CNC, Inch)

0.23

$63.06

45291

15" Extended Column Leadscrew (CNC, Metric)

0.23

$63.06

5011U

MILL X and Y AXIS STAR GEAR BACKLASH UPGRADE (Installs on mills made after 1997 when the pointer style backlash lock was replaced with the star gear type lock and up until July, 2004 when this change was incorporated into regular production. Includes new star gears and lead screw nuts with finer teeth for mill X and Y axis plus new button head screws to hold the locking gear.) (Metric 5111U)

0.05

$31.71

5090

MILL ACCORDION WAY COVERS (protects Y Axis led screw from chips)

0.23

$97.95

51171

LEADSCREW, X-AXIS, CNC (Metric)

0.23

$49.82

51172

LEADSCREW, X-AXIS 18", CNC (Inch)  (See 54182 for 18" mill table)

0.23

$89.24

51173

LEADSCREW, X-AXIS 18", CNC (Metric)  (See 54182 for 18" mill table)

0.23

$89.24

5150

MILL VINYL COVER (Protects your 5000-series and 5400-series mill from dust and grit)

0.11

$36.15

5151

MILL VINYL COVER (Protects your 2000-series mill from dust and grit)

0.11

$40.76

5200

XY BASE (10") (Inch) (Add a 3050 vertical milling column and the motor/speed control from your lathe and you have a model 5000 mill)(Metric P/N 5210)

7.71

$570.18

5200-CNC

XY BASE (10") CNC READY (Inch) w/ 2 stepper motor mounts for NEMA 23 frame size stepper motors. (Stepper motors and CNC controls not included.) (Metric P/N 5210-CNC)

9.07

$828.42

5201

XYZ BASE (10") (Inch) (Add the motor/speed control from your lathe and you have a model 5000 mill)(Metric P/N 5211)

11.79

$882.91

5201-CNC

XYZ BASE (10") CNC READY (Inch) w/ 3 stepper motor mounts for NEMA 23 frame size stepper motors. (Stepper motors and CNC controls not included.) (Metric P/N 5211-CNC)

12.23

$1,276.99

5220

XY BASE (10") W/ ADJUST. HAND WHEELS (Metric P/N 5225) (Add a vertical milling column with adjustable hand wheels and the motor/speed control from your lathe and you have a complete model 5500/5510 mill)

8.62

$703.84

5230

XYZ BASE (10" W/ ADJUST. HAND WHEELS (Metric P/N 5235) (Add the motor/speed control from your lathe and you have a complete model 5500/5510 mill)

11.79

$967.60

5300

HOME MACHINIST'S HANDBOOK by Doug Briney (275 pages, B/W, uses Sherline tools in all the setup examples, project plans included)

0.91

$72.06

5301

TABLETOP MACHINING by Joe Martin (The ultimate miniature machining book by Sherline's owner. All colour, 8-1/2 x 11, 400+ photos, 200+ illustrations.

1.36

$104.25

 

5305

MACHINE SHOP ESSENTIALSQuestions and Answers, by Frank Marlow, PE

1.40

$109.65

5306

MACHINE SHOP TRADE SECRETS, by James A. Harvey

1.30

87.70

5325

SHERLINE TOOLS & ACCESSORIES CATALOGUE, 6th Edition (48-page colour catalogue shows tools and accessories plus tells briefly how each is used. Current price lists enclosed.)

0.23

$23.02

5326

SHERLINE ASSEMBLY AND INSTRUCTION GUIDE, 4th Edition (44-page colour instruction book included with new machines. A good basic course in machining)

0.23

$23.02

5327

SHERLINE SHOP GUIDE (144 pages, B/W, 8.5 x 11" perfect bound book incorporates illustrated instructions from all of Sherline's major accessories.)

1.36

$58.04

5328-DVD

STEAM ENGINE VIDEO by Rudy Kouhoupt (DVD, 3 Hrs., includes materials list and printed plans for a steam engine. Video takes you through every setup from start to finish.)

0.68

$141.29

5329-DVD

SHOP SECRETS—Using Measuring Tools by Mike Rehmus (DVD, 112 min., tells you how each measuring tool used in machining is used and cared for. Very professionally produced. Includes promo for NAMES show too. DVD version

0.45

$86.08

5330

SAFETY GLASSES (A MUST in every shop. Get them from us or get them from someone else, but don't cut metal without them! These are good quality and comfortable.)

0.11

$29.22

5335

SHERLINE LATHE BASICS—How to Set Up and Operate the Sherline Lathe by Mike Rehmus (DVD, 3.6 hrs., basic setup operations, alignment, turning facing and boring plus segments on work holding, tapers, threading, removing chuck jaws, backlash and more. Segments on using a follower rest and milling on a lathe also included.)

0.23

$96.86

5401

DELUXE XY BASE (Inch) w/ 12" Base and Adjustable Hand wheels (Add a 3480 vertical milling column and the motor/speed control from your lathe and you have a complete deluxe model 5400 mill.) (Metric P/N 5411)

8.62

$773.14

5401-CNC

DELUXE XY BASE CNC READY w/ 2 stepper motor mounts for NEMA 23 frame size stepper motors. (Stepper motors and CNC controls not included.) (Metric P/N 5411-CNC)

9.53

$960.70

54182

18" Extended Mill table (Manual or CNC)

0.91

$333.86

5420

DELUXE XYZ BASE (Inch) w/ 12" Base and Adjustable Hand wheels (Metric P/N 5430) (Add the motor/speed control from your lathe and you have a complete deluxe model 5400 mill.)

12.25

$1,024.43

5420-CNC

DELUXE XYZ BASE CNC READY (Inch) w/ 3 stepper motor mounts for NEMA 23 frame size stepper motors. (Stepper motors and CNC controls not included.) (Metric P/N 5430-CNC)

12.7

$1,347.68

5600

Model 2000 8-DIRECTION MILL XY BASE (metric P/N 5610) (Add a multi-direction vertical milling column and the motor/speed control from your lathe and you have a complete model 2000 mill.)

9.98

$831.18

5600-CNC

Model 2000 8-DIRECTION MILL XY BASE (metric P/N 5610-CNC) (Same as above except stepper motor mounts are installed on the X- and Y-axes, ready to accept NEMA 23 stepper motors. Includes two 1-5/8" hand wheels for use on rear shafts of stepper motors. Motors not included.)

10.43

$1,071.26

5625

Model 2000 8-DIRECTION MILL XYZ BASE (metric P/N 5630) (Add the motor/speed control from your lathe and you have a complete model 2000 mill.)

15.42

$1,517.66

5625-CNC

Model 2000 8-DIRECTION MILL XYZ BASE (metric P/N 5630-CNC) (Same as above except stepper motor mounts are installed on the X-, Y-, and Z-axes, ready to accept NEMA 23 stepper motors. Includes two 1-5/8" hand wheels for use on rear shafts of stepper motors. Motors not included.)

15.88

$1,703.84

5650

8-DIRECTION UPGRADE for all existing SHERLINE MILLS (metric P/N 5660) (A multi-direction milling column and an offset base brings your existing mill up to the capabilities of a model 2000 mill.)

4.08

$528.33

5680

8-DIRECTION UPGRADE for LATHE VERTICAL MILLING COLUMN (metric P/N 5685) (Turns your lathe/vertical milling column combination into an 8-direction mill.)

4.08

$528.33

6079

1/4" END MILL HOLDER

0.23

$66.14

6080

3/16" END MILL HOLDER

0.23

$66.14

6081

1/8" END MILL HOLDER

0.23

$66.14

6100

HORIZONTAL MILLING CONVERSION

5

$338.59

6700

CNC UPGRADE KIT, 5000 OR 5400 MILL (Metric P/N 6710) (Replaces the hand wheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.)

1.13

$438.50

6705

CNC UPGRADE KIT, 2000 MILL (Metric P/N 6715) (Replaces the hand wheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.)

1.13

$438.50

 

67127

STEPPER MOTOR, 2 amp, #23 Frame, dual shaft, 6-wire, 136 oz-in stall torque, pre-wired with plug for use with Sherline rotary or linear controller, flats pre-machined for Sherline coupler and hand wheel set screws.

0.45

$155.38

67130

STEPPER MOTOR, 2 amp, #23 Frame, dual shaft, 6-wire, 136 oz-in stall torque, 6-wire plug-in harness with raw leads for use on applications that do not have the Sherline 5-pin connector plug, flats pre-machined for Sherline coupler and hand wheel set screws.

0.45

$139.98

6720

CNC UPGRADE KIT, 4000 or 4500 LATHE (Metric P/N 6725) (Replaces the hand wheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.)

0.91

$356.96

6730

CNC UPGRADE KIT, 4400 LATHE (Metric P/N 6735) (Replaces the hand wheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.)

0.91

$372.36

6740

CNC UPGRADE KIT, 5000 and 5400 Series Mills, Z-axis only (Metric P/N 6745)

0.68

$198.42

6750

CNC UPGRADE KIT, 2000 Series Mills, Z-axis only (Metric P/N 6755)

0.68

$198.42

6760

CNC UPGRADE KIT, mill X axis or lathe Crosslide only (all models) (Metric P/N 6765)

0.45

$150.76

6770

CNC UPGRADE KIT, mill Y axis only (all mill models) (Metric P/N 6775)

0.45

$150.76

6780

CNC UPGRADE KIT, lead screw axis only, 4000/4500-series lathes (Metric P/N 6785

0.45

$240.08

6790

CNC UPGRADE KIT, lead screw axis only, 4400-series lathes (Metric P/N 6795)

0.45

$255.48

7506

SET OF MACHINIST'S PARALLELS (Sets of two parallel bars in five different sizes sized for miniature machine tools. Used to support work a known distance above and parallel to the table.)

0.11

$95.00

7550

Super-Lube multi-purpose synthetic grease with Syncolon® (PTFE), 3 oz tube (Teflon-based grease that we use at the factory on all new machines. Clear, non-staining, heat resistant.)

0.11

$25.38

7555

Super-Lube dri-film spray lubricant with Syncolon® (PTFE), 11 oz aerosol can (Teflon-based film that sprays on. Once propellant dries, it leaves a thin coat of dry lubricant that won't attract chips.)

0.45

$36.80

7600

3/8" INSERT HOLDER TOOL POST (Has side slot to hold 3/8" shank cutting tool holders plus a 3/8" round hole to hold round boring bars.)

0.11

$48.47

7610

55° NEGATIVE RAKE INSERT HOLDER w/ insert (Holds carbide tips for cutting hard materials like stainless steel. 5° angle provides negative clearance for the cutter, which is supported all the way down to the table for rigidity.)

0.23

$112.35

7611

55° DIAMOND TIPPED INSERT, fits in standard Sherline 3/8" tool holders designed to hold 55° carbide inserts

0.02

$177.56

7612

REPLACEMENT 4-SIDED CARBIDE INSERT TOOL (for 7610)

0.02

$42.12

7620

SINGLE FLUTE INSERT FLY CUTTER (Carbide insert cuts hard materials. Also is a good compromise between a fly cutter and an end mill, because it will cut a 1-1/8" wide path while still being able to cut right up to a shoulder.)

0.23

$112.35

7622

REPLACEMENT 2-SIDED CARBIDE TIP (for 7620)

0.03

$39.85

8100

3-AXIS DIGITAL READOUT w/ RPM GAGE FOR MILL (inch) (Metric P/N 8160) (Reads table position to .0005", electronic compensation for backlash)

1.36

$635.54

 

8200

2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE (inch) (Metric P/N 8260) (Reads table position to .0005", electronic compensation for backlash)

1.36

$558.55

8210

3-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE and VERTICAL MILLING COLUMN (Inch) (Metric P/N 8215) (Reads table position to .0005", electronic compensation for backlash)

1.36

$650.94

8220

2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE without READOUT BOX (For those who already have a Mill DRO package) (Inch) (Metric P/N 8225) (Reads table position to .0005", electronic compensation for backlash)

0.91

$287.67

8240

Z-AXIS VERTICAL MILLING COLUMN DIGITAL READOUT HAND WHEEL PACKAGE (Inch) (Metric P/N 8245) (Adds third readout for those who bought 2-axis DRO and later add a vertical milling column.)

0.23

$120.05

8700

CNC ROTARY INDEXER w/ CONTROLLER, STEPPER MOTOR, MOUNT, POWER SUPPLY, CABLES, 4" ROTARY TABLE AND HOLD-DOWNS (Inch) (Stand-alone system with its own built-in computer is user programmable. A computer controlled stepper motor indexes the rotary table to within ±.006°. Can be daisy-chained with linear controller to do gear cutting.)

7.71

$1,286.28

8710

CNC ROTARY INDEXER RISER PLATE (On the 3700-CNC and 8700 CNC rotary tables, the bottom of the stepper motor mount extends slightly below the bottom surface of the table. On Sherline mills, the mount overhangs the side of the table so this is not a problem. On larger mills or flat table applications a riser plate is needed so that the stepper motor clears the table surface.)

0.91

$72.06

8730

CNC ROTARY TABLE WITH STEPPER MOTOR (Stepper motor plugs into 4th axis cable of 8760 driver box or Sherline 8540 or 8020 CNC system to act as 4th axis. Includes pre-wired plug.

4.53

$760.71

8760

CNC 4-AXIS DRIVER BOX (Includes 4 cables for X, Y, Z and A (Rotary) axes, power supply and parallel cable for attachment to computer's printer port. Linux OS and EMC 4-axis software also included on two CD's.

3.18

$1,002.97

8765

Upgrade any CNC-ready Sherline lathe to CNC (Computer not included.) Includes 2 stepper motors, 4-axis 8760 driver box, Linux/EMC software on CD.

5.44

$1,248.58

8770

Upgrade any CNC-ready Sherline mill to CNC (Computer not included.) Includes 3 stepper motors, 4-axis 8760 driver box and Linux/EMC software on CD.

6.8

$1,391.31

8775

Upgrade any CNC-ready Sherline shop package to CNC (Computer not included.) Includes 5 stepper motors, 4-axis 8760 driver box and Linux/EMC software on CD. Does NOT include software installation and technical support. (To upgrade manual 3700 rotary table ask to substitute 8730 table with stepper motor for additional charge of $300)

7.26

$1,600.60

8800

CNC LINEAR CONTROLLER w/ STEPPER MOTOR (Inch) (Stepper motor bolts onto Sherline CNC-ready stepper motor mounts. Controller drives stepper motor to move any axis on lathe or mill. From .0005" to 9.9995". Will work on any lathe or mill axis that already has a stepper motor mount installed. Includes power supply and cable. Can be daisy chained with other Sherline linear or rotary controllers.)

2.27

$769.21

8850

CNC MILL OR LATHE POWER FEED (MILL X- or Y-AXIS or LATHE CROSSLIDE) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES AND POWER SUPPLY (Replaces hand wheel on X- or Y-axis of mill  or lathe crosslide with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to allow movement from .0005" to 9.9995". Includes drill block for locating mounting holes. Can be daisy chained with other Sherline controllers) Inch version only

2.72

$862.98

8860

CNC MILL POWER FEED (Z-AXIS, 5000/5400 MILLS) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT Z-AXIS LEAD SCREW (Replaces hand wheel on Z-axis of mill with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move Z-axis in programmable .0005" increments up to full length of travel. Includes drill block for locating mounting holes. Can be daisy chained with other Sherline linear or rotary controllers.) Inch version only

3.18

$879.77

8865

CNC MILL POWER FEED (Z-AXIS, 2000 MILL) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT Z-AXIS LEAD SCREW (See description for 8860 above)

3.18

$879.77

8870

CNC LATHE LEAD SCREW POWER FEED, 4000/4500 LATHES, w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT 15" LEAD SCREW (Replaces hand wheel on long lead screw of lathe with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move the saddle from .0005 to 9.9995". Includes drill block for locating mounting holes. Can be daisy chained with other Sherline linear or rotary controllers.) Inch version only

3.18

$895.17

8880

CNC LATHE LEAD SCREW POWER FEED, 4400 LATHES, w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT 24" LEAD SCREW  (See description for 8870 above.)

3.18

$910.57

8900

HIGH SPEED ENGRAVING HEAD AND SPINDLE, Includes headstock, spindle, 3 carbide engraving cutters, 7 grinding tools, 2 collet wrenches, 6' air line and lubricator fitting. (For turning 1/8" carbide engraving cutters at speeds up to 54,000 RPM. Replaces standard Sherline DC motor and headstock unit.)  

1.59

$470.69

8976

TOOL POST for 8900 High speed grinder, Mounts to lathe table to hold 8900 grinder horizontally as a tool post grinder.  

0.11

$79.27

8987

RISER TOOL POST for 8900 high speed grinder, taller post mounts to lathe table to hold 8900 grinder horizontally when lathe has riser blocks in place.  

0.23

$81.54